AXILINE ® 97000
Transmission Dynamometer for Light & Medium-duty Applications
- Industries
- Remanufacturing
- Repair
- Development
- Production
- Component Validation
- Durability
- Applications
- Light Truck
- Medium Truck
- Passenger Vehicles
- Marine
- Industrial Vehicles
- Agricultural Vehicles
- Racing
The Axiline 97000 features full digital control for highly accurate and repeatable testing. It adapts to most all domestic and foreign front-wheel-drive, rear-wheel-drive, transverse, manual, and CVT transmissions. The 97000 tests transmission line pressure, shift point and response, downshift and converter lockup, stall speed and more - all under simulated vehicle load conditions. The standard SuperShifter Pro software system gives the operator full digital control of both the dyno and the transmission from a simple laptop computer. The laptop is conveniently mounted on a movable tray so the operator can spot oil and pressure leaks, check hydraulic and system controls, and make minor adjustments while the transmission is mounted on the tester. The 97000 can be upgraded with a WinDyn Data Acquisition system for instances when data must be stored and reviewed during post test analysis.
Axiline 97000 Features
- High-output, electric-drive, 40 horsepower motor with advanced control strategies to accurately mimic transmission inputs from internal combustion engines
- Eddy current power absorption units for dynamic loaded testing to simulate real world driving conditions
- Electric, push-button eddy current absorber movement
- SuperShifter Pro® Software
- Jib crane & hoist for fast and simple transmission mounting and dismounting (holds up to 350 lbs.)
- Drip trays with removable shield
- Fill & drain pumps with hoses to fill and drain filtered ATF from the 97000'S self contained tank
- Electric shuttle motors to easily position absorbers and motor for different transmission configurations
- Complete tooling required for testing
- Steel pilot bushings for precise, no hassle transmission alignment
- Quick disconnect hose fittings for rapid test throughput
| Axiline 97000 Specifications | |
|---|---|
| Power Requirements | 220/240 V 3-phase, 50-60 Hz or 460/480 V, 50-60 Hz & 110/120V Single Phase (380 V available upon request) |
| Air Requirements | 1/2" lines (12.8 mm), 100 psi (689.5 kPa) minimum |
| Weight | 4,000 lbs. (1,814 kg) |
| Dimensions | 75 in. X 178 in. X 98 in. (191 cm X 452 cm X 248 cm) *includes jib crane |
| Input Drive (prime mover) | |
|---|---|
| Type | Direct-drive AC motor |
| Power | 40 HP (30 kW) |
| Constant Power | 1,750 to 3,600 RPM |
| Constant Torque | 0 to 1,750 RPM |
| Maximum Speed | 3,600 RPM |
| Eddy Current Power Absorber | |
|---|---|
| Type | Air Cooled, bi-directional |
| Model | K70 |
| Inertia | 23.3 lb-ft2 (.98 kgm2) |
| Maximum Speed | 5,500 RPM |
| Peak Power Absorption | 1,000 RPM, Cold: 495 lb-ft (671 N-m) |
| 1,000 RPM, Hot: 227 lb-ft (308 N-m) | |
| 5,000 RPM, Cold: 385 lb-ft (522 N-m) | |
| 5,000 RPM, Hot: 129 lb-ft (175 N-m) | |
