AutoDyn 30 AWD Chassis Dyno
SuperFlow's new AutoDyn 30 all-wheel drive chassis dyno model lets you test four-wheel drive, all-wheel drive and models equipped with modern anti-lock braking and traction-control systems that insist that all four wheels are turning at similar speeds. The standard, single-power-absorber model is perfect for most passenger vehicles including modified, high performance vehicles.
SuperFlow's design includes trunnion-mounted differentials that allow SuperFlow to measure torque at each axle, individually, so you can evaluate center differential torque bias.
The AutoDyn 30 AWD chassis dyno accommodates wheelbases from 92.5" (235 cm) to 130" (330 cm), which covers most cars and light-duty trucks.
Wheelbase adjustments are made using hydraulic rams for rapid, precise control. Rolls are positively connected to one another and to the power absorption unit via splined shafts and axles. There are no belts that affect repeatability and reliability.
All SuperFlow chassis dynamometers are calibrated at the factory to correct for internal windage and parasitic losses using an AC motor and sophisticated electronics for precise measurement and superior repeatability.
- Light roll .................................................... 280 lbs (128 Kg)
- Standard roll ............................................. 450 lbs (205 Kg)
- Heavy roll .................................................. 600 lbs (273 Kg)
- Eddy current absorber effective inertia ......... 43 lbs (20 Kg)
- Inertia ........................................................ 500 hp (370 kW)
- Eddy-current-absorber.......................... 300 hp @ 80 mph (220 kW @ 130 Kph)
- Roll min/max. tracking width .............. 18"-62" (46-157 cm)
- Roll min/max. tracking width
(with EC module between rolls) .... 49"-93" (124-236 cm)
- Inertia dyno only ... 120 VAC, 15 amps or 240 VAC, 8 amps
- EC dyno option ...................................... 240 VAC, 30 amps
- Base dyno ........ 85" L x 36" W x 20.5" H (216 x 91 x 52 cm)
- Primary roll ............... 20" diameter x 16" wide (51 x 41 cm)
- Secondary roll ........... 20" diameter x 28" wide (51 x 71 cm)
- Sensor box on rolling stand ............... 24" L x 24" W x 52" H
............................................................ (61 x 61 x 132 cm) - Eddy current module.................. 31" L x 22.75" W x 21.5" H
.............................................................. (79 x 58 x 55 cm) - Secondary 28” roll module ....... 40" L x 22.75" W x 20.25" H
............................................................ (102 x 58 x 51 cm)
- Base dyno with standard inertia roll ...... 1,200 lbs (546 Kg)
- (with heavy inertia roll) ........................ 1,500 lbs (682 Kg)
- Second 28” roll module ............................ 425 lbs (194 Kg)
- Eddy current module ................................. 600 lbs (273 Kg)
- Sensor box on rolling stand .......................... 35 lbs (16 Kg)
